Tag Archives: Maintenance

Olympic Bar Maintenance

Lets encounter it regardless of whether you invested $ 150 or $ 1500 on your Olympic bar it almost certainly represents a considerable investment on your component. If you are working a health club, specially a CrossFit or Strength and Conditioning fitness center, bars are absolutely a single of the most employed and abused pieces of equipment you have. Typically though no one takes the time to properly preserve the bars. Let us encounter it, the bar gets utilized and forgotten about, not to mention that usually there are a assortment of bar brands that are currently being used and usually the manufacturers do not send out info regarding the care of the bar. In fact I emailed all of our bar vendors asking them for information on how to sustain and care for their bars and a single truly emailed me and said, “Here is our warranty details. Will not overload the bar, will not drop the bar.” That was it! Practically nothing else. I have to inform you I was floored. So, the question stays, “How do we sustain and care for our Olympic bars?”


A single thing that should be apparent about bars is that they are steel. Steel rusts when it will get moist. Individuals sweat. Sweat=Wet=Bar Rust. Bar companies try out to fight this by putting a coating on the bars. The most frequent coatings (from least costly to most high-priced) are black oxide, chrome, zinc, and producing bars from stainless steel. Even with these coatings you nevertheless require to keep the bar so hear are a couple of guidelines on what you can do.

Clean the chalk out of the knurling. If you use chalk and you are the only a single making use of the chalk then please clean the chalk off the bar. If you provide chalk at your health club then you need to have to clean the chalk off frequently (most likely daily). Use a small stiff nylon bristle brush to go in excess of the knurling. Keep in mind that chalk dries sweaty palms. How does it do this? By absorbing moisture. Guess what it does although sitting on the bar. Absorbs moisture! Any humidity in the air any moisture at all and the chalk will absorb and hold it on the steel. So if you want your bars to not rust please clean off the chalk.

Wipe your bars down routinely with a light coat of WD-forty or three in one oil. Frequently depends on how often the bar is used. If this is in your house then twice a month must be sufficient. If you are in a business setting then once a week would be much better. If your employing them a whole lot and in a high humidity region then you may need to have to do it much more regularly. WD-forty works effectively since it is a water displacer and it dries speedily. Spray it on a rag and wipe it down giving a excellent even coat across the whole bar. If you use 3 in 1 oil again area it on the rag and give a good thin coating across the complete bar. Allow it sit overnight and then wipe it down again. three in one will work great but it will depart your bars feeling a bit more greasy then WD-40.

Most bars these days have been produced to be relatively maintenance totally free. You typically do not have to oil the sleeves. Most of the sleeves have oil impregnated bearings or bushings. Some of the higher end bars do have little oil holes in the sleeves. For these bars you would drop in some 3 in one oil (DO NOT use WD-40 right here) and let it operate into the sleeve. Once more do this after use and check out it prior to employing it yet again for any excess that could have leaked out to wipe it up.


Bars need to not be stored with bodyweight on them. Time period. If you depart excess weight on your bar, specifically if it is racked, you are just begging for a bent bar. The are developed to withstand the weight not made to completely hold the weight. Strip you bars. I know you are exhausted soon after a tough work out but please catch your breath and put the plates away. Not only will this protect your bar, but if you are in a fitness center it will make the next individual who utilizes the bar significantly happier if they never have to strip it for you.

The bars can be stored on the rack unloaded or in a bar stand. If you can retailer them horizontally it is much better the vertically. We highly recommend that you do not store needle bearing bars in a horizontal bar holder. Dropping the bar into the holder can cause damage to the needle bearings. Most gyms that teach the Olympic lifts (that would use a needle bearing bar) do not care about mirrors so it is extremely straightforward to make a wall rack that you can store the bars on. Potomac CrossFit did a fantastic job with theirs. Take a search at the photograph.

All in all its fairly simple to sustain an Olympic bar. A couple of minutes and you can protect your investment so that it lasts for many years and years. If you have any other tips on maintaining your Olympic bar we would really like to hear them. Depart us a comment.

Noah Alkinburgh is a father of 4, CrossFit Level 1 Trainer and IT manager at Christian’s Fitness Factory – The Ultimate Fitness Tools Supplier (http://www.christiansfitnessfactory.com). Christian’s Fitness Factory is your comprehensive supply for Business &amp Residential Fitness Gear at cost-effective prices. Please check out http://www.christiansfitnessfactory.com/index.php/Bars/See-all-goods for our total line of Olympic Bars.

A lot more Bar Mitzvah Articles